IMG_2704115
IMG_2704116
IMG_2704121
IMG_2714948
IMG_2762078
IMG_2704119
IMG_2704117
IMG_2970881
IMG_2727758
IMG_2727755
IMG_2727754
IMG_2727753

Product description

Warm & light:the perfect combination for this freeride ski jacket!The inner pads keep you warm where neededYou can breathe while staying protected from the cold

This waterproof jacket excels off-piste, protecting you from powder whilst remaining breathable. Well insulated for extra warmth and a relaxed fit for a free flowing freeride.

WEDZE

Men's ski jacket - fr500 - burgundy

Dhs. 995.00

Size Guide

Size Guide

Size Guide

MEN'S
Find My Size
IN CM
Find Size
Tops
UK Size Chest (in) Waist (in)
XS 33.1 – 34.3 27.6 – 28.7
S 34.6 – 35.8 29.1 – 30.3
M 36.2 – 37.4 30.7 – 31.9
L 37.8 – 40.6 32.3 – 35.0
XL 40.9 – 44.5 35.4 – 39.4
2XL 44.9 – 48.4 39.8 – 43.7
3XL 48.8 – 53.1 44.1 – 48.4
Bottoms
UK Size Low Hip (in) Waist (in)
XS 31.5 – 33.5 26.0 – 28.0
S 33.9 – 35.8 28.3 – 30.3
M 36.2 – 38.2 30.7 – 32.7
L 38.6 – 40.9 33.1 – 35.0
XL 41.3 – 43.7 35.4 – 38.2
2XL 44.1 – 46.5 38.6 – 41.3
3XL 46.9 – 49.6 41.7 – 44.5
HOW TO MEASURE:

1- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when you're looking straight ahead.

2- Chest: Wrap a tape measure around your back and measure the fullest part of your chest. Make sure it's straight and parallel to the floor. Look straight ahead, tighten the tape and breathe normally.

3- Waist: Wrap a tape measure around the narrowest part of your waist, above your belly button. Raise your head, tighten the tape and breathe normally.

4- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

How to measure
WOMEN'S
Find My Size
IN CM
Find Size
Tops
.5 – 32.7.9 – 48.4
UK Size Low Hip (in) Waist (in)
2XS 22.8 – 24.4
XS 33.1 – 34.3 24.4 – 25.6
S 34.6 – 35.8 26.0 – 27.2
M 36.2 – 37.4 27.6 – 28.7
L 37.8 – 40.6 29.1 – 33.1
XL 40.9 – 44.5 33.5 – 37.8
2XL 38.2 – 42.5
Bottoms
.1 – 33.5.9 – 47.2
UK Size Low Hip (in) Waist (in)
2XS 23.6 – 24.8
XS 33.5 – 35.4 25.2 – 26.8
S 35.4 – 37.8 27.2 – 28.7
M 37.8 – 40.2 29.1 – 31.1
L 40.2 – 42.5 31.5 – 33.9
XL 42.5 – 44.9 34.3 – 36.6
2XL 37.0 – 39.4
Bra
UK Size Bust (in) Underbust (in)
2XS 30.7 – 31.5 24.8 – 26.4
XS 31.5 – 33.5 24.8 – 28.3
S 33.5 – 35.4 26.8 – 30.3
M 35.4 – 37.4 28.7 – 32.3
L 37.4 – 39.4 30.7 – 34.3
XL 39.4 – 41.3 32.7 – 36.2
2XL 41.3 – 43.3 34.6 – 38.2
HOW TO MEASURE:

1- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when you're looking straight ahead.

2- Bust: Wrap a tape measure around your back and measure the fullest part of your bust. Make sure it's straight and parallel to the floor. Look straight ahead, tighten the tape and breathe normally.

3- Underbust: Directly below the bust, wrap a tape measure around the ribcage. Make sure it's straight and parallel to the floor. Raise your head, tighten the tape and breathe normally.

4- Waist: Wrap a tape measure around the narrowest part of your waist, above your belly button. Raise your head, tighten the tape and breathe normally.

5- Hips: Wrap a tape measure around the fullest part of your hips.

6- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

How to measure
KIDS'
Find My Size
IN CM
Find Size
Boys
Age Height (in) Chest (in) Waist (in) Low Hip (in)
6 months 24.0 – 27.2 16.5 – 16.9 14.6 – 15.2 16.5 – 17.1
9 months 27.6 – 28.3 16.9 – 17.3 15.2 – 15.6 17.1 – 17.7
12 months 28.7 – 29.5 17.3 – 17.7 15.6 – 16.1 17.7 – 18.5
18 months 29.9 – 31.9 18.1 – 18.5 16.3 – 16.9 18.5 – 19.3
24 months 32.3 – 34.6 18.9 – 19.3 17.3 – 18.1 19.3 – 20.3
2 – 3 years 35.0 – 37.4 19.7 – 20.1 18.1 – 18.9 20.3 – 20.9
3 – 4 years 37.8 – 40.2 20.5 – 21.3 19.3 – 20.1 21.3 – 22.4
4 – 5 years 40.6 – 44.1 21.7 – 22.4 20.1 – 20.9 22.8 – 24.0
5 – 6 years 44.5 – 48.0 22.8 – 23.6 20.9 – 21.7 24.4 – 25.6
7 – 8 years 48.4 – 51.2 24.4 – 24.8 21.7 – 22.4 26.0 – 27.2
8 – 9 years 51.6 – 55.1 25.2 – 26.4 22.8 – 23.6 27.6 – 28.7
10 – 11 years 55.5 – 59.1 26.8 – 28.7 24.0 – 25.2 29.1 – 30.3
12 – 13 years 59.4 – 63.0 29.1 – 31.5 25.6 – 27.2 30.7 – 33.1
14 – 15 years 63.4 – 67.7 31.9 – 34.6 27.6 – 29.1 33.5 – 35.8
Girls
Age Height (in) Chest (in) Waist (in) Low Hip (in)
6 months 24.0 – 27.2 15.4 – 16.9 13.4 – 15.2 15.4 – 17.1
9 months 27.6 – 28.3 16.9 – 17.3 15.2 – 15.6 17.1 – 17.7
12 months 28.7 – 29.5 17.3 – 17.7 15.6 – 16.1 17.7 – 18.5
18 months 29.9 – 31.9 18.1 – 18.5 16.3 – 16.9 18.5 – 19.3
24 months 32.3 – 34.6 18.9 – 19.3 17.3 – 18.1 19.3 – 20.3
2 – 3 years 35.0 – 37.4 19.7 – 20.1 18.1 – 18.9 20.3 – 20.9
3 – 4 years 37.8 – 40.2 20.5 – 21.3 19.3 – 20.1 21.3 – 22.4
4 – 5 years 40.6 – 44.1 21.7 – 22.4 20.1 – 20.9 22.8 – 24.0
5 – 6 years 44.5 – 48.0 22.8 – 23.6 20.9 – 21.7 24.4 – 25.6
7 – 8 years 48.4 – 51.2 24.4 – 24.8 21.7 – 22.4 26.0 – 27.2
8 – 9 years 51.6 – 55.1 25.2 – 26.4 22.8 – 23.6 27.6 – 28.7
10 – 11 years 55.5 – 58.3 26.8 – 28.0 24.0 – 24.8 29.1 – 31.9
12 – 13 years 58.7 – 62.6 28.3 – 31.9 25.2 – 26.4 32.3 – 35.0
14 – 15 years 63.0 – 65.4 32.3 – 33.9 26.8 – 28.0 35.4 – 36.6
HOW TO MEASURE:

1- Height: Stand against a wall, barefoot or in socks, heels pasted to the wall. Stand right, then hold a book or flat object on the top of your head. Block the book, mark the bottom edge of the book. Measure the distance from the floor to the mark.

2- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when your head is straight.

3- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

How to measure
FOOTWEAR
Find My Size
IN CM
Find Size
Men's Footwear
UK Size EU Size Foot Length (in)
5.5 38.5 9.6
6 39 9.6
6 39.5 9.8
6.5 40 10.0
6.5 40.5 10.0
7 41 10.2
7.5 41.5 10.4
7.5 42 10.4
8 42.5 10.6
8.5 43 10.8
9 43.5 11.0
9.5 44 11.0
10 44.5 11.2
10.5 45 11.2
10.5 45.5 11.4
11 46 11.6
11.5 46.5 11.6
Women's Footwear
UK Size EU Size Foot Length (in)
2 34 8.25
2.5 34.5 8.5
3 35 8.7
3 35.5 8.9
3.5 36 8.9
4 36.5 9.1
4.5 37 9.3
4.5 37 9.3
5 38 9.4
5.5 38.5 9.6
5.5 39 9.6
6 39.5 9.8
6.5 40 10.0
6.5 40.5 10.0
7 41 10.2
7.5 41.5 10.4
8 42 10.4
Unisex Footwear
UK Women's / Men's EU Size Foot Length (in)
W3 / M2.5 35 8.6
W3.5 / M3 36 8.9
W4 / M3.5 36.5 9.1
W4.5 / M4 37 9.3
W5 / M4.5 37.5 9.3
W5.5 / M5 38 9.4
W6 / M5.5 39 9.6
W6.5 / M6 39.5 9.8
W7 / M6.5 40 10.0
W7.5 / M7 41 10.2
W8 / M7.5 41.5 10.4
W8.5 / M8 42 10.4
W9 / M8.5 43 10.8
W9.5 / M9 43.5 11.0
W10 / M9.5 44 11.0
W10.5 / M10 44.5 11.2
W11 / M10.5 45 11.2
W12 / M11 46 11.6
W13 / M12 47 11.8
W14 / M12.5 48 12.0
HOW TO MEASURE:

Foot length: Stand against a wall, heels touching the wall. Put an object (e.g. book) against your longest toe. Measure the length between the wall and the object. Repeat this process for the other foot. If the lengths are different, choose the largest.

How to measure
ACCESSORIES
Measurements
IN CM
Headwear (Caps, Beanies, Hats)
UK Size Head (in)
2XS 18.5 – 19.7
XS 19.7 – 20.9
S 20.9 – 22.0
M 22.0 – 23.2
L 23.2 – 24.4
Helmets
UK Size Head (in)
2XS 17.3 – 19.3
XS 18.5 – 20.5
S 20.5 – 21.7
M 21.7 – 23.2
L 23.2 – 24.4
Gloves
UK Size Palm perimeter (in) Hand length (in)
2XS 7.0 – 7.3 6.3 – 6.6
XS 7.3 – 7.6 6.7 – 6.9
S 7.6 – 7.9 7.0 – 7.2
M 8.0 – 8.2 7.2 – 7.4
L 8.3 – 8.5 7.4 – 7.7
XL 8.6 – 8.9 7.7 – 7.9
2XL 8.9 – 9.2 8.0 – 8.1
3XL 9.2 – 9.5 8.2 – 8.4
HOW TO MEASURE:

1- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when your head is straight.

2- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

BIKES
Measurements
IN CM
Kids' Bikes
Bike size Height
12" 2'5" – 3'0"
14" 3'0" – 3'5"
16" 3'5" – 3'11"
20" 3'11" – 4'5"
24" 4'5" – 5'1"
Road & Gravel Bikes
Bike size Height
XS 5'1" – 5'5"
S 5'5" – 5'8"
M 5'8" – 5'11"
L 5'11" – 6'2"
XL 6'2" – 6'7"
Mountain Bikes
Bike size Height
S 4'11" – 5'5"
M 5'5" – 5'9"
L 5'9" – 6'0"
XL 6'0" – 6'7"
Ref: 8873337
Size: S
Color : Unique
In stock
Home Delivery 2 - 4 Days
Up to 2-year warranty
Secure Payments

Product description

Warm & light:the perfect combination for this freeride ski jacket!The inner pads keep you warm where neededYou can breathe while staying protected from the cold

This waterproof jacket excels off-piste, protecting you from powder whilst remaining breathable. Well insulated for extra warmth and a relaxed fit for a free flowing freeride.
Description

Warm & light:the perfect combination for this freeride ski jacket!The inner pads keep you warm where neededYou can breathe while staying protected from the cold

Warmth and breathability technology

Positioned warm pads provide good thermal protection for your Freeride skiing days. This concept means you keep a wide area where the 3 layer membrane can wick away your perspiration. A perfect compromise between a completely padded jacket and 3 layer jacket with no extra warmth. Modularity is the key word for this jacket. It’s important to add a warmer or cooler second layer depending on the conditions.

Additional features

Helmet hood designed to offer maximum protection with freedom of movement. Adjustable to fit 3 sizes in a single movement, using a tightening system located behind the head. Tightening on the wrist and cuffs with thumb loop to prevent air and snow from getting in. Snow skirt that also reduces draughts and prevents snow from getting inside.

Ventilation

To stay dry, it is important to wear a waterproof jacket. But you shouldn't end up wet with perspiration. The vents play an important role in wicking away perspiration. This is why we have equipped this jacket with two zipped air vents with two large zipped under the arms (35cm in size L).

Cut

The loose fit and preformed sleeves free up your movements and let you ski in complete freedom. We designed this jacket with a component that has mechanical stretch. You can move freely while skiing.

Pockets

2 hand pockets with a waterproof zip. 1 inside chest pocket with watertight zip. 1 outer chest pocket with watertight zip. 1 pocket on the left pocket for your skipass with watertight zip. 1 quick access inner mesh pocket.

What should you wear under your skiing jacket?

To keep warm and dry, use the 3-breathable-layers rule: A ski base later and a second layer liner jacket to retain warmth, a third layer ski jacket to protect you from bad weather. The base layer keeps you dry by wicking away the perspiration from the skin to the other layers. The second layer provides warmth. Such as padded jackets or fleece sweaters.

The third layer

This layer provides protection from the outdoor elements (snow, rain and wind) by keeping them out (while still letting perspiration escape from inside so you don’t feel wet). It should therefore ideally be waterproof AND breathable. The third layer (or layer 3) can also provide insulation in the case of lined trousers or jacket and complement the second layer (or layer 2).

Water repellency

Water-repellent fabric allows water to run off its surface without seeping in. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.

Component waterproofing

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 10,000mm can therefore withstand the pressure exerted by 10,000mm of water.

Breathability of a component

The component of this jacket has a RET of 12. To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric 9 < RET < 12 = very breathable fabric 12 < RET < 20 = breathable fabric RET > 20 = little or no breathability.

What is a membrane or coated component?

The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more resistant and often more breathable than a coating.

How do we make a garment waterproof?

The waterproof properties of the garment are related to its fabric, seam sealing and assembly design. We then carry out shower tests on our garments.

Waterproofness/Shower test

This garment has been validated in a shower test under 100L of water/sqm/hour for 3 hours. This test reproduces the conditions of a heavy mountain storm.

How do we make a garment breathable?

In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh, etc.) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.

Your product is repairable

For the two years of guarantee, if your product can be repaired, the repairs (hooks, seams, zips, etc.) are done free of charge. Beyond this period, they can still be done for a fee, locally at your usual shop.

What is the RECCO® system?

All our freeride ski jackets and trousers are equipped with the RECCO® system. With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.

Tutorial on how to wash your waterproof garment

We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment. Link: https://youtu.be/rh4GLwALgBM After three washes, restore the water repellent properties with a waterproof spray or wash-in product.

To help you choose the right size

The model is wearing a size L and measures 180 cm. Measurements: Waist size: 85 cm Hip measurement: 100 cm Chest size: 100 cm

WEIGHT

0.78kg in size L

This waterproof jacket excels off-piste, protecting you from powder whilst remaining breathable. Well insulated for extra warmth and a relaxed fit for a free flowing freeride.

Waterproof

15,000mm (Schmerbers) membrane and taped seams. Waterproof zip

Breathability

The membrane, placed heat pads and ventilation help wick away perspiration

Freedom of movement

Loose fit and stretch fabric that follow all your movements

Warmth

Glued heat pads (100g/sqm wadding) protect you moderately where needed

Limits snow entering

Helmet hood, storm cuffs and a snow skirt to face the winter

Pockets

5 secure pkts: 2 hand, 1 chest, 1 inner, 1 ski pass, 1 mesh pocket

Anatomic design

3D hood adjustment that can be put over the helmet and follows your movements

Airing

Two large vents under the arms to lower the temperature after your runs

Warm & light:the perfect combination for this freeride ski jacket!The inner pads keep you warm where neededYou can breathe while staying protected from the cold

Warm & light:the perfect combination for this freeride ski jacket!The inner pads keep you warm where neededYou can breathe while staying protected from the cold

Warmth and breathability technology

Positioned warm pads provide good thermal protection for your Freeride skiing days. This concept means you keep a wide area where the 3 layer membrane can wick away your perspiration. A perfect compromise between a completely padded jacket and 3 layer jacket with no extra warmth. Modularity is the key word for this jacket. It’s important to add a warmer or cooler second layer depending on the conditions.

Additional features

Helmet hood designed to offer maximum protection with freedom of movement. Adjustable to fit 3 sizes in a single movement, using a tightening system located behind the head. Tightening on the wrist and cuffs with thumb loop to prevent air and snow from getting in. Snow skirt that also reduces draughts and prevents snow from getting inside.

Ventilation

To stay dry, it is important to wear a waterproof jacket. But you shouldn't end up wet with perspiration. The vents play an important role in wicking away perspiration. This is why we have equipped this jacket with two zipped air vents with two large zipped under the arms (35cm in size L).

Cut

The loose fit and preformed sleeves free up your movements and let you ski in complete freedom. We designed this jacket with a component that has mechanical stretch. You can move freely while skiing.

Pockets

2 hand pockets with a waterproof zip. 1 inside chest pocket with watertight zip. 1 outer chest pocket with watertight zip. 1 pocket on the left pocket for your skipass with watertight zip. 1 quick access inner mesh pocket.

What should you wear under your skiing jacket?

To keep warm and dry, use the 3-breathable-layers rule: A ski base later and a second layer liner jacket to retain warmth, a third layer ski jacket to protect you from bad weather. The base layer keeps you dry by wicking away the perspiration from the skin to the other layers. The second layer provides warmth. Such as padded jackets or fleece sweaters.

The third layer

This layer provides protection from the outdoor elements (snow, rain and wind) by keeping them out (while still letting perspiration escape from inside so you don’t feel wet). It should therefore ideally be waterproof AND breathable. The third layer (or layer 3) can also provide insulation in the case of lined trousers or jacket and complement the second layer (or layer 2).

Water repellency

Water-repellent fabric allows water to run off its surface without seeping in. This prevents the fabric from becoming waterlogged and remains light, breathable and warm. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be renewed during the lifetime of the garment (we recommend every 3 washes). All Wedze jackets have received a water-repellent treatment.

Component waterproofing

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a waterproof rating of 10,000mm can therefore withstand the pressure exerted by 10,000mm of water.

Breathability of a component

The component of this jacket has a RET of 12. To find out whether a fabric is breathable, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric's resistance, the more water vapour generated by physical activity can escape and the higher the fabric's breathability. For example: RET < 9 = extremely breathable fabric 9 < RET < 12 = very breathable fabric 12 < RET < 20 = breathable fabric RET > 20 = little or no breathability.

What is a membrane or coated component?

The coating is akin to a paint applied inside the fabric that makes the component waterproof while remaining breathable. It is often less expensive than a membrane and requires a liner to protect it. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof while remaining breathable. It has the advantage of being more flexible, lighter, more resistant and often more breathable than a coating.

How do we make a garment waterproof?

The waterproof properties of the garment are related to its fabric, seam sealing and assembly design. We then carry out shower tests on our garments.

Waterproofness/Shower test

This garment has been validated in a shower test under 100L of water/sqm/hour for 3 hours. This test reproduces the conditions of a heavy mountain storm.

How do we make a garment breathable?

In addition to the breathability of the fabrics used, we employ technical solutions (zips, vents, mesh, etc.) improving the overall ventilation of our jackets and trousers designed for Freeride skiing. These ventilation systems regulate the temperature inside the garment while also helping to eliminate the perspiration generated by the body during physical activity.

Your product is repairable

For the two years of guarantee, if your product can be repaired, the repairs (hooks, seams, zips, etc.) are done free of charge. Beyond this period, they can still be done for a fee, locally at your usual shop.

What is the RECCO® system?

All our freeride ski jackets and trousers are equipped with the RECCO® system. With RECCO® technology, you can be located in the event of an avalanche. Someone who is buried in the snow can be quickly and accurately located by the emergency services using the RECCO® tracker and reflectors. RECCO® reflectors are not a substitute for an AVD. The RECCO® technology works as a complementary measure, increasing the chances of being found in time.

Tutorial on how to wash your waterproof garment

We recommend that you follow these guidelines at every wash in order to retain all the technical features of your garment. Link: https://youtu.be/rh4GLwALgBM After three washes, restore the water repellent properties with a waterproof spray or wash-in product.

To help you choose the right size

The model is wearing a size L and measures 180 cm. Measurements: Waist size: 85 cm Hip measurement: 100 cm Chest size: 100 cm

WEIGHT

0.78kg in size L

This waterproof jacket excels off-piste, protecting you from powder whilst remaining breathable. Well insulated for extra warmth and a relaxed fit for a free flowing freeride.

Waterproof

15,000mm (Schmerbers) membrane and taped seams. Waterproof zip

Breathability

The membrane, placed heat pads and ventilation help wick away perspiration

Freedom of movement

Loose fit and stretch fabric that follow all your movements

Warmth

Glued heat pads (100g/sqm wadding) protect you moderately where needed

Limits snow entering

Helmet hood, storm cuffs and a snow skirt to face the winter

Pockets

5 secure pkts: 2 hand, 1 chest, 1 inner, 1 ski pass, 1 mesh pocket

Anatomic design

3D hood adjustment that can be put over the helmet and follows your movements

Airing

Two large vents under the arms to lower the temperature after your runs

Warm & light:the perfect combination for this freeride ski jacket!The inner pads keep you warm where neededYou can breathe while staying protected from the cold