IMG_1801085
IMG_1951359
IMG_1775958
IMG_1801086
IMG_1801076
IMG_1808926
IMG_1801053
IMG_1801071

SIMOND

Men's waterproof leather high trekking boots - mt00 hyb

Dhs. 155.00 Dhs. 349.00
Sold out

Size Guide

Size Guide

Size Guide

MEN'S
Find My Size
IN CM
Find Size
Tops
UK Size Chest (in) Waist (in)
XS 33.1 – 34.3 27.6 – 28.7
S 34.6 – 35.8 29.1 – 30.3
M 36.2 – 37.4 30.7 – 31.9
L 37.8 – 40.6 32.3 – 35.0
XL 40.9 – 44.5 35.4 – 39.4
2XL 44.9 – 48.4 39.8 – 43.7
3XL 48.8 – 53.1 44.1 – 48.4
Bottoms
UK Size Low Hip (in) Waist (in)
XS 31.5 – 33.5 26.0 – 28.0
S 33.9 – 35.8 28.3 – 30.3
M 36.2 – 38.2 30.7 – 32.7
L 38.6 – 40.9 33.1 – 35.0
XL 41.3 – 43.7 35.4 – 38.2
2XL 44.1 – 46.5 38.6 – 41.3
3XL 46.9 – 49.6 41.7 – 44.5
HOW TO MEASURE:

1- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when you're looking straight ahead.

2- Chest: Wrap a tape measure around your back and measure the fullest part of your chest. Make sure it's straight and parallel to the floor. Look straight ahead, tighten the tape and breathe normally.

3- Waist: Wrap a tape measure around the narrowest part of your waist, above your belly button. Raise your head, tighten the tape and breathe normally.

4- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

How to measure
WOMEN'S
Find My Size
IN CM
Find Size
Tops
.5 – 32.7.9 – 48.4
UK Size Low Hip (in) Waist (in)
2XS 22.8 – 24.4
XS 33.1 – 34.3 24.4 – 25.6
S 34.6 – 35.8 26.0 – 27.2
M 36.2 – 37.4 27.6 – 28.7
L 37.8 – 40.6 29.1 – 33.1
XL 40.9 – 44.5 33.5 – 37.8
2XL 38.2 – 42.5
Bottoms
.1 – 33.5.9 – 47.2
UK Size Low Hip (in) Waist (in)
2XS 23.6 – 24.8
XS 33.5 – 35.4 25.2 – 26.8
S 35.4 – 37.8 27.2 – 28.7
M 37.8 – 40.2 29.1 – 31.1
L 40.2 – 42.5 31.5 – 33.9
XL 42.5 – 44.9 34.3 – 36.6
2XL 37.0 – 39.4
Bra
UK Size Bust (in) Underbust (in)
2XS 30.7 – 31.5 24.8 – 26.4
XS 31.5 – 33.5 24.8 – 28.3
S 33.5 – 35.4 26.8 – 30.3
M 35.4 – 37.4 28.7 – 32.3
L 37.4 – 39.4 30.7 – 34.3
XL 39.4 – 41.3 32.7 – 36.2
2XL 41.3 – 43.3 34.6 – 38.2
HOW TO MEASURE:

1- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when you're looking straight ahead.

2- Bust: Wrap a tape measure around your back and measure the fullest part of your bust. Make sure it's straight and parallel to the floor. Look straight ahead, tighten the tape and breathe normally.

3- Underbust: Directly below the bust, wrap a tape measure around the ribcage. Make sure it's straight and parallel to the floor. Raise your head, tighten the tape and breathe normally.

4- Waist: Wrap a tape measure around the narrowest part of your waist, above your belly button. Raise your head, tighten the tape and breathe normally.

5- Hips: Wrap a tape measure around the fullest part of your hips.

6- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

How to measure
KIDS'
Find My Size
IN CM
Find Size
Boys
Age Height (in) Chest (in) Waist (in) Low Hip (in)
6 months 24.0 – 27.2 16.5 – 16.9 14.6 – 15.2 16.5 – 17.1
9 months 27.6 – 28.3 16.9 – 17.3 15.2 – 15.6 17.1 – 17.7
12 months 28.7 – 29.5 17.3 – 17.7 15.6 – 16.1 17.7 – 18.5
18 months 29.9 – 31.9 18.1 – 18.5 16.3 – 16.9 18.5 – 19.3
24 months 32.3 – 34.6 18.9 – 19.3 17.3 – 18.1 19.3 – 20.3
2 – 3 years 35.0 – 37.4 19.7 – 20.1 18.1 – 18.9 20.3 – 20.9
3 – 4 years 37.8 – 40.2 20.5 – 21.3 19.3 – 20.1 21.3 – 22.4
4 – 5 years 40.6 – 44.1 21.7 – 22.4 20.1 – 20.9 22.8 – 24.0
5 – 6 years 44.5 – 48.0 22.8 – 23.6 20.9 – 21.7 24.4 – 25.6
7 – 8 years 48.4 – 51.2 24.4 – 24.8 21.7 – 22.4 26.0 – 27.2
8 – 9 years 51.6 – 55.1 25.2 – 26.4 22.8 – 23.6 27.6 – 28.7
10 – 11 years 55.5 – 59.1 26.8 – 28.7 24.0 – 25.2 29.1 – 30.3
12 – 13 years 59.4 – 63.0 29.1 – 31.5 25.6 – 27.2 30.7 – 33.1
14 – 15 years 63.4 – 67.7 31.9 – 34.6 27.6 – 29.1 33.5 – 35.8
Girls
Age Height (in) Chest (in) Waist (in) Low Hip (in)
6 months 24.0 – 27.2 15.4 – 16.9 13.4 – 15.2 15.4 – 17.1
9 months 27.6 – 28.3 16.9 – 17.3 15.2 – 15.6 17.1 – 17.7
12 months 28.7 – 29.5 17.3 – 17.7 15.6 – 16.1 17.7 – 18.5
18 months 29.9 – 31.9 18.1 – 18.5 16.3 – 16.9 18.5 – 19.3
24 months 32.3 – 34.6 18.9 – 19.3 17.3 – 18.1 19.3 – 20.3
2 – 3 years 35.0 – 37.4 19.7 – 20.1 18.1 – 18.9 20.3 – 20.9
3 – 4 years 37.8 – 40.2 20.5 – 21.3 19.3 – 20.1 21.3 – 22.4
4 – 5 years 40.6 – 44.1 21.7 – 22.4 20.1 – 20.9 22.8 – 24.0
5 – 6 years 44.5 – 48.0 22.8 – 23.6 20.9 – 21.7 24.4 – 25.6
7 – 8 years 48.4 – 51.2 24.4 – 24.8 21.7 – 22.4 26.0 – 27.2
8 – 9 years 51.6 – 55.1 25.2 – 26.4 22.8 – 23.6 27.6 – 28.7
10 – 11 years 55.5 – 58.3 26.8 – 28.0 24.0 – 24.8 29.1 – 31.9
12 – 13 years 58.7 – 62.6 28.3 – 31.9 25.2 – 26.4 32.3 – 35.0
14 – 15 years 63.0 – 65.4 32.3 – 33.9 26.8 – 28.0 35.4 – 36.6
HOW TO MEASURE:

1- Height: Stand against a wall, barefoot or in socks, heels pasted to the wall. Stand right, then hold a book or flat object on the top of your head. Block the book, mark the bottom edge of the book. Measure the distance from the floor to the mark.

2- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when your head is straight.

3- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

How to measure
FOOTWEAR
Find My Size
IN CM
Find Size
Men's Footwear
UK Size EU Size Foot Length (in)
5.5 38.5 9.6
6 39 9.6
6 39.5 9.8
6.5 40 10.0
6.5 40.5 10.0
7 41 10.2
7.5 41.5 10.4
7.5 42 10.4
8 42.5 10.6
8.5 43 10.8
9 43.5 11.0
9.5 44 11.0
10 44.5 11.2
10.5 45 11.2
10.5 45.5 11.4
11 46 11.6
11.5 46.5 11.6
Women's Footwear
UK Size EU Size Foot Length (in)
2 34 8.25
2.5 34.5 8.5
3 35 8.7
3 35.5 8.9
3.5 36 8.9
4 36.5 9.1
4.5 37 9.3
4.5 37 9.3
5 38 9.4
5.5 38.5 9.6
5.5 39 9.6
6 39.5 9.8
6.5 40 10.0
6.5 40.5 10.0
7 41 10.2
7.5 41.5 10.4
8 42 10.4
Unisex Footwear
UK Women's / Men's EU Size Foot Length (in)
W3 / M2.5 35 8.6
W3.5 / M3 36 8.9
W4 / M3.5 36.5 9.1
W4.5 / M4 37 9.3
W5 / M4.5 37.5 9.3
W5.5 / M5 38 9.4
W6 / M5.5 39 9.6
W6.5 / M6 39.5 9.8
W7 / M6.5 40 10.0
W7.5 / M7 41 10.2
W8 / M7.5 41.5 10.4
W8.5 / M8 42 10.4
W9 / M8.5 43 10.8
W9.5 / M9 43.5 11.0
W10 / M9.5 44 11.0
W10.5 / M10 44.5 11.2
W11 / M10.5 45 11.2
W12 / M11 46 11.6
W13 / M12 47 11.8
W14 / M12.5 48 12.0
HOW TO MEASURE:

Foot length: Stand against a wall, heels touching the wall. Put an object (e.g. book) against your longest toe. Measure the length between the wall and the object. Repeat this process for the other foot. If the lengths are different, choose the largest.

How to measure
ACCESSORIES
Measurements
IN CM
Headwear (Caps, Beanies, Hats)
UK Size Head (in)
2XS 18.5 – 19.7
XS 19.7 – 20.9
S 20.9 – 22.0
M 22.0 – 23.2
L 23.2 – 24.4
Helmets
UK Size Head (in)
2XS 17.3 – 19.3
XS 18.5 – 20.5
S 20.5 – 21.7
M 21.7 – 23.2
L 23.2 – 24.4
Gloves
UK Size Palm perimeter (in) Hand length (in)
2XS 7.0 – 7.3 6.3 – 6.6
XS 7.3 – 7.6 6.7 – 6.9
S 7.6 – 7.9 7.0 – 7.2
M 8.0 – 8.2 7.2 – 7.4
L 8.3 – 8.5 7.4 – 7.7
XL 8.6 – 8.9 7.7 – 7.9
2XL 8.9 – 9.2 8.0 – 8.1
3XL 9.2 – 9.5 8.2 – 8.4
HOW TO MEASURE:

1- Head: Wrap a tape measure around your head, above your eyebrows. Make sure it is parallel to the floor when your head is straight.

2- Hand: Hold a tape measure at the bend of the thumb. Wrap around your palm.

BIKES
Measurements
IN CM
Kids' Bikes
Bike size Height
12" 2'5" – 3'0"
14" 3'0" – 3'5"
16" 3'5" – 3'11"
20" 3'11" – 4'5"
24" 4'5" – 5'1"
Road & Gravel Bikes
Bike size Height
XS 5'1" – 5'5"
S 5'5" – 5'8"
M 5'8" – 5'11"
L 5'11" – 6'2"
XL 6'2" – 6'7"
Mountain Bikes
Bike size Height
S 4'11" – 5'5"
M 5'5" – 5'9"
L 5'9" – 6'0"
XL 6'0" – 6'7"
Ref: 8501910
Size: UK 5.5 - EU 39
Color : abyss blue
Home Delivery 2 - 4 Days
Up to 2-year warranty
Secure Payments
Description

These waterproof leather boots let you progress in maximum comfort with good support on easy marked trails.

European made 100% of our Forclaz boots are manufactured in Europe

These trekking boots are manufactured in the European Union, in Romania, in a factory specialising in the production of trekking boots (GRISPORT) This factory uses exclusively water-based adhesives, without chemical solvents. Most materials are of European origin. MANUFACTURER: https://grisport.it/com pany/?lang=en Copy/paste the links on this page into your preferred search engine.

Dope Dye process used on the lining of this model

Dyeing textiles uses lots of water, chemical products and energy. However, we enjoy wearing colour. To reduce this impact, we use the “Dope Dyed” technique where powder colour pigments are added when the yarn is produced (and not by soaking it in dye baths as is usually the case). This reduces consumption and the discharge of waste water from colouring our fabrics.

Benefit of the self-locking hook

With this material, you can separate the upper and lower lacing This allows you to adjust the lacing to the shape of your foot and give your ankle as much freedom as you like. To separate the upper lacing from the lower part, make a simple knot level with your instep or use your shoes’ self-locking hook. All of our trekking shoes have this feature.

Routes suited to this boot

This boot is designed for trekking on generally low altitude routes and/or on trails. It can occasionally be used on more technical sections: passages over rocks, firm snow, slopes.

Contact® technology for our soles

The grip and traction of our soles is certified Contact® To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (smooth, rugged, dry, wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over more than 500 km. The notching also gives you grip adapted to muddy or wet terrain.

Advantages and drawbacks of this leather model

Advantages: - supple leather - durable and waterproof, the leather prevents water running across the boot by repelling and absorbing it - breathable leather (natural pores of leather skin), but less so than a synthetic boot in strong heat. To reduce this problem, nubuck leather is used for greater breathability, but it is also more sensitive to the rain Drawbacks: - it needs to be nourished, hydrated and treated to remain waterproof.

This boot’s waterproof level

This boot has been tested and validated for 10,000 flexes repeatable, equivalent to a 15 km walk, in water reaching the mid-upper. This now guarantees a good level of boot waterproofing. --> Our assessment indicates a LEVEL OF 3/5 giving 6 hours of waterproofing when hiking in the rain. The details of tests carried out to assess the waterproofing of our boots is below.

Make this boot’s waterproofing last longer

A waterproof grease is recommended to nourish leather to stop it drying out (cracking), to make it waterproof and protect against stains 1/ Trekking boot maintenance brush: https://www.decathlon.co.uk/p/shoe-maintenance-brush/_/R-p-307665?mc=8551990 2/ Grease for re-waterproofing leather boots: https://www.decathlon.co.uk/p/grease-for-re-waterproofing-leather-boots/_/R-p-9513?mc=8677747

Increase your boot’s waterproofing with a gaiter

The waterproofing of boots is often compromised because water gets in at the collar of the boot. --> To keep your feet dry for longer, it is advisable to use a waterproof gaiter or mini-gaiter that will prevent water as well as pebbles and sand from getting inside through the top of the boot. Model perfectly suited to this trekking gaiter MT500 black https://www.decathlon.co.uk/p/trek-500-trekking-gaiters-black/_/R-p-124466?mc=8347880&c=BLACK

Maintain your boots by following 6 steps

1/ Take out the laces to avoid getting grease on them 2/ Brush when dry to remove dust and all the particles stuck to the leather. This is essential so any dirt doesn’t get stuck under a new layer of grease 3/ Grease the leather with a brush, rub it deep into all the seams and gaps. 4/ Wipe off the excess grease with a soft cloth 5/ Rub gently to make them shine 6/ Replace the laces

Waterproofing my leather boots with a reactivating spray

1/ Use a brush and/or sponge to clean the boots and remove residual earth or mud. 2/ Next, leave to air-dry, well away from a heat source. 3/ Finish by applying a water protection booster spray to maintain optimal water-repellent properties of the upper and to prolong the life span of the boot. Link below for the applicator, also available online : https://www.decathlon.fr/p/applicateur-re-activateur-de-deperlance-pour-chaussures/_/R-p-307629?mc=8551

Choosing your size is an important point.

For hiking, do not hesitate to buy one size larger than the usual size to guarantee excellent comfort on the descent and to avoid toes rubbing at the tip of the shoe. Tip: keep your toenails short and, before descending, check that your lacing prevents your foot from sliding forwards inside the boot.

5 levels of waterproofing

During the waterproofness test, we test 5 levels of waterproofness: - 2,000 flexes (approximately 4 km, 30 minutes of walking) - 10,000 flexes (approximately 10 km, 3 hours of walking) - 30,000 flexes (approximately 15 km, 6 hours of walking) - 50,000 flexes (approximately 20 km, 8 hours of walking) - 100,000 flexes (approximately >20 km, 24 hours of walking)

Waterproofing test carried out on this model

Our boots are laboratory tested by 2 consecutive tests Test 1: We test the effectiveness of the membrane alone immersed in water under air pressure. We simply check for any bubbles on the surface like a pierced air chamber Test 2: Thanks to a mechanical arm that simulates walking, the entire boots are half immersed in water and they complete thousands of flexes to check that the inside of the boot remains dry and it is therefore waterproof

Try your boots out step by step

How to choose your boots: 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces correctly. 3. Check the following two areas of comfort: the base of the heel and the front part of the foot going down. 4. Stand up to walk with the boots on. 5. Try on several sizes and several models. 6. Gradually start using you shoes during your first few hiking trips to break them in.

Main complementary laboratory tests

Laboratory tests were conducted to test the following elements: - tearing of the eyelets and straps - bonding of the sole - toxicology - UV-resistance - abrasion of the sole and components of the upper - accelerated ageing

Walk in comfort and protection with these waterproof high-top boots. Perfect for clearly marked paths and moderate slopes, these boots offer excellent support and cushioning.

Traction

100% rubber CONTACT® sole that improves grip and traction

Foot motion

Flexible sole to improve walking, ideal for easy trail routes

Foot support

High upper, equipped with 2 high hooks and 1 secure blocker hook

Cushioning

Sole heel made with a long-lasting shock-absorbing material (PU)

Weight

585 g per boot in size 42 (UK size 8)

Durability

Leather upper and front toe bumper for greater strength and durability

Waterproof

Waterproof and breathable membrane (6 hours of walking in the rain)

These waterproof leather boots let you progress in maximum comfort with good support on easy marked trails.

These waterproof leather boots let you progress in maximum comfort with good support on easy marked trails.

European made 100% of our Forclaz boots are manufactured in Europe

These trekking boots are manufactured in the European Union, in Romania, in a factory specialising in the production of trekking boots (GRISPORT) This factory uses exclusively water-based adhesives, without chemical solvents. Most materials are of European origin. MANUFACTURER: https://grisport.it/com pany/?lang=en Copy/paste the links on this page into your preferred search engine.

Dope Dye process used on the lining of this model

Dyeing textiles uses lots of water, chemical products and energy. However, we enjoy wearing colour. To reduce this impact, we use the “Dope Dyed” technique where powder colour pigments are added when the yarn is produced (and not by soaking it in dye baths as is usually the case). This reduces consumption and the discharge of waste water from colouring our fabrics.

Benefit of the self-locking hook

With this material, you can separate the upper and lower lacing This allows you to adjust the lacing to the shape of your foot and give your ankle as much freedom as you like. To separate the upper lacing from the lower part, make a simple knot level with your instep or use your shoes’ self-locking hook. All of our trekking shoes have this feature.

Routes suited to this boot

This boot is designed for trekking on generally low altitude routes and/or on trails. It can occasionally be used on more technical sections: passages over rocks, firm snow, slopes.

Contact® technology for our soles

The grip and traction of our soles is certified Contact® To be awarded certification, the boots must pass laboratory tests to assess the grip rate on different surfaces (smooth, rugged, dry, wet). To validate these tests, we assess the quality of our soles in the field, in the mountains, by a panel of representative testers over more than 500 km. The notching also gives you grip adapted to muddy or wet terrain.

Advantages and drawbacks of this leather model

Advantages: - supple leather - durable and waterproof, the leather prevents water running across the boot by repelling and absorbing it - breathable leather (natural pores of leather skin), but less so than a synthetic boot in strong heat. To reduce this problem, nubuck leather is used for greater breathability, but it is also more sensitive to the rain Drawbacks: - it needs to be nourished, hydrated and treated to remain waterproof.

This boot’s waterproof level

This boot has been tested and validated for 10,000 flexes repeatable, equivalent to a 15 km walk, in water reaching the mid-upper. This now guarantees a good level of boot waterproofing. --> Our assessment indicates a LEVEL OF 3/5 giving 6 hours of waterproofing when hiking in the rain. The details of tests carried out to assess the waterproofing of our boots is below.

Make this boot’s waterproofing last longer

A waterproof grease is recommended to nourish leather to stop it drying out (cracking), to make it waterproof and protect against stains 1/ Trekking boot maintenance brush: https://www.decathlon.co.uk/p/shoe-maintenance-brush/_/R-p-307665?mc=8551990 2/ Grease for re-waterproofing leather boots: https://www.decathlon.co.uk/p/grease-for-re-waterproofing-leather-boots/_/R-p-9513?mc=8677747

Increase your boot’s waterproofing with a gaiter

The waterproofing of boots is often compromised because water gets in at the collar of the boot. --> To keep your feet dry for longer, it is advisable to use a waterproof gaiter or mini-gaiter that will prevent water as well as pebbles and sand from getting inside through the top of the boot. Model perfectly suited to this trekking gaiter MT500 black https://www.decathlon.co.uk/p/trek-500-trekking-gaiters-black/_/R-p-124466?mc=8347880&c=BLACK

Maintain your boots by following 6 steps

1/ Take out the laces to avoid getting grease on them 2/ Brush when dry to remove dust and all the particles stuck to the leather. This is essential so any dirt doesn’t get stuck under a new layer of grease 3/ Grease the leather with a brush, rub it deep into all the seams and gaps. 4/ Wipe off the excess grease with a soft cloth 5/ Rub gently to make them shine 6/ Replace the laces

Waterproofing my leather boots with a reactivating spray

1/ Use a brush and/or sponge to clean the boots and remove residual earth or mud. 2/ Next, leave to air-dry, well away from a heat source. 3/ Finish by applying a water protection booster spray to maintain optimal water-repellent properties of the upper and to prolong the life span of the boot. Link below for the applicator, also available online : https://www.decathlon.fr/p/applicateur-re-activateur-de-deperlance-pour-chaussures/_/R-p-307629?mc=8551

Choosing your size is an important point.

For hiking, do not hesitate to buy one size larger than the usual size to guarantee excellent comfort on the descent and to avoid toes rubbing at the tip of the shoe. Tip: keep your toenails short and, before descending, check that your lacing prevents your foot from sliding forwards inside the boot.

5 levels of waterproofing

During the waterproofness test, we test 5 levels of waterproofness: - 2,000 flexes (approximately 4 km, 30 minutes of walking) - 10,000 flexes (approximately 10 km, 3 hours of walking) - 30,000 flexes (approximately 15 km, 6 hours of walking) - 50,000 flexes (approximately 20 km, 8 hours of walking) - 100,000 flexes (approximately >20 km, 24 hours of walking)

Waterproofing test carried out on this model

Our boots are laboratory tested by 2 consecutive tests Test 1: We test the effectiveness of the membrane alone immersed in water under air pressure. We simply check for any bubbles on the surface like a pierced air chamber Test 2: Thanks to a mechanical arm that simulates walking, the entire boots are half immersed in water and they complete thousands of flexes to check that the inside of the boot remains dry and it is therefore waterproof

Try your boots out step by step

How to choose your boots: 1. Try on both shoes, standing up, with the socks worn for hiking. 2. Tighten the laces correctly. 3. Check the following two areas of comfort: the base of the heel and the front part of the foot going down. 4. Stand up to walk with the boots on. 5. Try on several sizes and several models. 6. Gradually start using you shoes during your first few hiking trips to break them in.

Main complementary laboratory tests

Laboratory tests were conducted to test the following elements: - tearing of the eyelets and straps - bonding of the sole - toxicology - UV-resistance - abrasion of the sole and components of the upper - accelerated ageing

Walk in comfort and protection with these waterproof high-top boots. Perfect for clearly marked paths and moderate slopes, these boots offer excellent support and cushioning.

Traction

100% rubber CONTACT® sole that improves grip and traction

Foot motion

Flexible sole to improve walking, ideal for easy trail routes

Foot support

High upper, equipped with 2 high hooks and 1 secure blocker hook

Cushioning

Sole heel made with a long-lasting shock-absorbing material (PU)

Weight

585 g per boot in size 42 (UK size 8)

Durability

Leather upper and front toe bumper for greater strength and durability

Waterproof

Waterproof and breathable membrane (6 hours of walking in the rain)

These waterproof leather boots let you progress in maximum comfort with good support on easy marked trails.