4 Man Tent - MH100

This tent has a classic dome structure.All you have to do is fit the tent poles with the bedroom, and then fit the flysheet on top.To strike the tent, the process is the same, but in reverse.If it is windy it is advisable to attach the guy ropes that are provided in the tent bag.

Recommended tent with a self-inflating mattress or trekking mattress up to 65 cm wide.We do not recommend using inflatable mattresses, that are more than 8 cm thick, in this tent.Indeed, this greatly reduces the volume inside the tent and increases condensation inside.

So that air can flow and be replaced between the bedroom and the flysheet, and eliminate the natural condensation as much as possible, the tent has 1 air vent at the top, 2 air vents at the sides and 1 inner door with a mesh upper section.

All our tents are validated in the laboratory and in the field to guarantee the waterproofing.To do this, we put the entire tent under a 200 L/h shower for 3 hours.The flysheet is made of 2000mm Schmerber PU-coated polyester and the groundsheet is made of 120g/m² polyethylene. All the seams are sealed with thermobonded tape.

We test all our tents in a wind tunnel on a turntable to expose each side to the wind. A well-assembled tent with all the guy ropes properly deployed around it should remain habitable with a wind speed measured at 35 km/h near the ground (Force 5).

- 1 bedroom- 1 waterproof flysheet- 2 poles- 12 tent pegs- 4 guy ropes- 1 cover

This camping tent was designed for occasional outdoor use (4 weeks per year) during your camping trips or in the countryside.Continuous exposure to UV light over a period of several weeks can damage its textile part.Our tents are not classified as “garden furniture” and aren’t designed to be left outdoors permanently.To maximise the lifetime of your tent, it's important to store it properly when it is not being used.3-year guarantee.

Our tents are great for camping at night.Over time, they age and some parts may wear out or break.To facilitate repairs, we keep a stock of parts (tent poles, flysheets, bedrooms, etc.) so that they can be easily replaced.Don't throw away, repair !

Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie.This location is a place where our teams (designers, product managers, engineers, etc.) can meet with outdoor sports enthusiasts.A significant advantage for designing high-quality products and giving you access to all our expertise.

Created in our international design centre at the foot of the Mont Blanc in France, this tent is then manufactured and assembled by our suppliers in China, Vietnam and Bangladesh.These are partners that have genuine expertise in making our tents and with whom we are in close collaboration.Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.

Created in our international design centre at the foot of the Mont Blanc in France, this tent is then manufactured and assembled by our suppliers in China, Vietnam and Bangladesh.These are partners that have genuine expertise in making our tents and with whom we are in close collaboration.Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps to create jobs.By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect, personal fulfilment and environmental protection.